epi - Electrical Enclosures

Nema Type 1 Screw Cover Enclosures

Application

EPI Nema Type 1 Screw Cover Enclosures are designed for use as pull boxes. These enclosures are used in areas which do not require protection from rain, snow, or sleet.

Construction

Made from 18, 16, or 14 gauge steel. Flat removable covers are fastened with screws. For flush installations, flush covers and screw cover pull boxes must be ordered separately.

Finish

The standard finish is G-90 galvanized steel. An ANSI-70 light-dove gray painted enamel finish is also available inside and out.

Accessories

Panels may be ordered separately. KO’s can be provided on 4” and 6” deep only.

Standards

Meets National Electrical Manufacturers Association (NEMA) standard for Type 1 (General Purpose) enclosure.

Click on printer for print friendly version:

Standard Sizes

Click Custom button to specify non-standard size.

Width	Height	Depth	Width	Height	Depth
4	4	4	6	10	8
4	6	4	6	12	8
6	6	4	8	8	8
6	8	4	8	10	8
6	10	4	8	12	8
6	12	4	10	10	8
8	8	4	10	12	8
8	10	4	12	12	8
8	12	4	12	18	8
10	10	4	12	24	8
10	12	4	18	18	8
10	16	4	18	24	8
12	12	4	18	30	8
12	18	4	18	36	8
12	24	4	24	24	8
18	18	4	24	30	8
18	24	4	24	36	8
18	30	4	24	48	8
18	36	4	30	30	8
20	24	4	30	36	8
24	24	4	30	48	8
24	30	4	36	36	8
24	36	4	48	48	8
24	48	4	8	10	10
30	30	4	8	12	10
30	36	4	10	10	10
30	48	4	10	12	10
30	60	4	12	12	10
30	72	4	12	18	10
36	36	4	12	24	10
36	48	4	18	18	10
36	60	4	18	24	10
36	72	4	18	30	10
48	48	4	18	36	10
6	6	6	24	24	10
6	8	6	24	30	10
6	10	6	24	36	10
6	12	6	24	48	10
8	8	6	30	30	10
8	10	6	30	36	10
8	12	6	30	48	10
10	10	6	36	36	10
10	12	6	48	48	10
12	12	6	10	10	12
12	18	6	10	12	12
12	24	6	12	12	12
18	18	6	12	18	12
18	24	6	12	24	12
18	30	6	18	18	12
18	36	6	18	24	12
20	24	6	18	30	12
24	24	6	18	36	12
24	30	6	24	24	12
24	36	6	24	30	12
24	48	6	24	36	12
30	30	6	24	48	12
30	36	6	30	30	12
30	48	6	30	36	12
30	60	6	30	48	12
30	72	6	36	36	12
36	36	6	48	48	12
36	48	6	6	6	18
48	48	6	36	36	18
6	8	8
Item Code=1000