 |
ApplicationE.P.I. Nema Type 4 Double Door, Aluminum Wall Mount Enclosures are designed to house electrical controls, terminals, and instruments in areas, which may be regularly hosed down or are in very wet environments. |
| ConstructionThese enclosures are made from .125 5052H Quarter Hard Aluminum sheets. All seams are continuously welded. There are no holes or knockouts. A lip is provided on all three sides of the door to insure a watertight seal with oil resistant neoprene gaskets. The door clamps are quick and easy to operate, and have no loose parts. Exterior clamps, clamp screws and hinge pins are stainless steel. A hasp and staple are provided for padlocking. A center post is provided for extra rigidity. External feet are provided for mounting.FinishThe standard finish is 5052H Quarter Hard Aluminum Sheets.AccessoriesPanels must be ordered separately as they are not furnished.StandardsMeets National Electrical Manufacturers Association (NEMA) Type 4 (Water Tight and Dust Tight) and Type 13 (Oil Tight and Dust Tight) enclosures. Also conforms to the Joint Indus-trial Council (JIC) standard EGP-1-1967. UL50. |
